HD-EXT-USB-2000-C

309kr

A point-to-point signal extender for HDMI®, USB 2.0, RS-232, IR, and Ethernet signals.

Kategori:
Key Features
  • HDBaseT® Certified 4K Ultra HD signal extender
  • Extends uncompressed digital video, audio, control, and LAN signals over a single CAT type twisted pair cable [1]
  • Supports cable lengths up to 330 ft (100 m) depending on the video resolution and wire type [1]
  • Handles video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI®, DVI, and DisplayPort Multimode sources [2]
  • Compatible with HDMI and DVI display devices [2]
  • Includes balanced and unbalanced stereo analog audio input and output [3,4]
  • Supports stereo analog audio embedding and de-embedding
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Extends 10/100 Ethernet, RS-232, and IR control signals
  • Extends USB 2.0 signals in either direction (mode selectable) [5]
  • Low-profile surface mount design
  • Universal 100-240V power pack included
  • Ideal for use with Crestron Mercury™ systems
  1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
  2. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
  3. The analog stereo audio input must be selected manually. When the analog audio input is selected, the HDMI audio input signal is disabled.
  4. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog or HDMI input.
  5. The USB mode can be selected manually or automatically to enable the USB host (computer, etc.) to be connected at either the transmitter or receiver end, not both. This product is engineered to deliver maximum compatibility with the widest possible range of USB equipment. Crestron does not guarantee that all USB devices or hosts are compatible with this product.
Sum per mnd: eks mva
Legg til i handlekurv

Beskrivelse

Key Features
  • HDBaseT® Certified 4K Ultra HD signal extender
  • Extends uncompressed digital video, audio, control, and LAN signals over a single CAT type twisted pair cable [1]
  • Supports cable lengths up to 330 ft (100 m) depending on the video resolution and wire type [1]
  • Handles video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI®, DVI, and DisplayPort Multimode sources [2]
  • Compatible with HDMI and DVI display devices [2]
  • Includes balanced and unbalanced stereo analog audio input and output [3,4]
  • Supports stereo analog audio embedding and de-embedding
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Extends 10/100 Ethernet, RS-232, and IR control signals
  • Extends USB 2.0 signals in either direction (mode selectable) [5]
  • Low-profile surface mount design
  • Universal 100-240V power pack included
  • Ideal for use with Crestron Mercury™ systems
  1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
  2. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
  3. The analog stereo audio input must be selected manually. When the analog audio input is selected, the HDMI audio input signal is disabled.
  4. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog or HDMI input.
  5. The USB mode can be selected manually or automatically to enable the USB host (computer, etc.) to be connected at either the transmitter or receiver end, not both. This product is engineered to deliver maximum compatibility with the widest possible range of USB equipment. Crestron does not guarantee that all USB devices or hosts are compatible with this product.